GENTAUR Belgium BVBA BE0473327336
Voortstraat 49, 1910 Kampenhout BELGIUM
Tel 0032 16 58 90 45
GENTAUR U.S.A Genprice Inc 6017 Snell Ave, Ste 357, SanJose, CA 95123
Tel (408) 780-0908, Fax (408) 780-0908, email@example.com
#31000 EVAGREEN 20X
Product name : EVAGREEN 20X
Catalog number : 31000
Quantity: 5 ML
Supplier name : Biotium
Data sheet: Ask more or other datasheet now !
More Details about
EvaGreen Dye, 20X in water
Catalog Number: 31000
Packaging Size: 5x1 mL
Molecular Information: Proprietary* Color and Form: Light orange solution
Spectral Property: λabs/λem = 500/530 nm (DNA bound); λabs = 471 nm (without DNA)
Storage and Handling
EvaGreen dye is generally very stable. We recommend EvaGreen 20X solution be stored at 4°C or below to prevent mold formation. The expected shelf-life under the recommended condition should be at least 12 month from the date of receipt. When taking the dye solution out of the freezer, vortex the solution for a few seconds in case of dye adsorption on the container wall during storage.
EvaGreen dye is a green fluorescent nucleic acid dye with features that make the dye useful for several applications including qPCR1,2, highresolution DNA melt curve analysis (HRM)3, real-time monitoring of thermophilic helicase-dependent amplification (tHDA)4, routine solution DNA quantification5,6 and capillary gel electrophoresis7,8. The DNA-bound dye has excitation and emission spectra very close to those of fluorescein (FAM) or SYBR Green I (Figure 1), making the dye readily compatible with instruments equipped with the 488 nm argon laser or any visible light excitation with wavelength in the region. EvaGreen dye is extremely stable both thermally and hydrolytically (Figure 2), providing convenience during routine handling. The dye is essentially nonfluorescent by itself, but becomes highly fluorescent upon binding to dsDNA. EvaGreen dye is nonmutagenic and noncytotoxic by being completely impermeable to cell membranes (Figure 3), unlike SYBR Green I, which enters cell rapidly
and is known to be a powerful mutation-enhancer9. The unique properties of EvaGreen dye have made it particularly useful in quantitative real-time PCR (qPCR) application. Compared with the
widely used SYBR Green I, EvaGreen dye is generally less inhibitory toward PCR and less likely to cause nonspecific amplification. As a result, EvaGreen dye can be used at a much higher dye concentration than SYBR Green I, resulting in more robust PCR signal. More significantly, the higher EvaGreen concentration permitted for qPCR eliminates so-called “dye redistribution” problem, which can occur with SYBR Green I during post PCR DNA melt curve analysis. Dye redistribution problem may make SYBR Green I unreliable for regular DNA melt curve analysis (Giglio, et al. Nucleic Acid Res. 31(22), e136(2003)) and also unsuitable for HRM (Wittwer, et al. Clin. Chem. 49(6), 853(2003)). On the other hand, EvaGreen dye is suitable for both qPCR and HRM, yielding robust and reproducible results.
EvaGreen 20X solution is specifically formulated for qPCR use. PCR reaction can be monitored using your existing optical setting for SYBR Green I or FAM on any commercial real-time PCR cycler. The qPCR protocol provided below is for PCR using regular non-hot-start Taq. Use of a hot-start Taq may require some adjustment of PCR buffer composition in terms of ionic strength and pH to best take the advantage of EvaGreen dye. For example, chemically-modified Taq, such as AmpliTaq Gold, may prefer a downward-adjustment of KCl concentration (to as low as 0.0 mM) and an upward-adjustment of Tris concentration (to as high as 50 mM). In addition, a water soluble solvent such as DMSO or glycerol has traditionally been added to stabilize a master mix. These components plus the pH may need to be optimized depending on the nature of your enzyme. Nevertheless, if you use a regular non-hot-start Taq and follow the protocol provided below, you should expect to see superior performance from EvaGreen dye over that from SYBR Green I. Because the optical settings vary slightly from instrument to instrument and the wavelengths of EvaGreen dye are slightly longer than those of SYBR Green I, Ct value may differ slightly by +1 or –1 when compared with SYBR Green I side-by-side. However, regardless of which cycler you use, the fluorescence signals with EvaGreen dye for both qPCR and melt curve analysis should be significantly stronger than those with SYBR Green I.
Recommended Protocol for 50 μL-sized Reactions (employing non-hotstart Taq):
1 Set up PCR reaction as follows:
5 μL of 10x polymerase buffer without magnesium 1
2.5μL of 50mM MgCl2 2
5 μL each of 2 mM dNTP 3
2.5 μL of 20X EvaGreen 4
1-5 units of Taq DNA polymerase 5
0.1-1 μM each of primers (final concentrations)
Add Di-H2O to make a final volume of 50 μL.
2 Perform real-time PCR reaction on a thermocycling fluorometer and record the fluorescence signal at the annealing or extension step.
1 For iCycler users, you do not need to add FAM to your PCR mix since EvaGreenTM has a slight background fluorescence that provides an adequate and stable baseline level fluorescence for well calibration. When using ABI Sequence Detection Systems, make sure to select NONE for the passive reference under the tab WELL INSPECTOR. BSA may be required if the reaction is run on a Roche LightCycler. A final BSA concentration of 0.5mg/mL may be sufficient. With SYBR Green, addition of a protein such as BSA results in a fluorescence increase, which provides a background signal that
triggers the start of a LightCycler. Since EvaGreenTM dye is less sensitive to proteins, you
may need to adjust the instrument setting (for background fluorescence) so that the
instrument will start.
2 For chemically-modified Taq, it may be necessary to downward adjust KCl concentration and upward adjust Tris concentration.
3 The optimal Mg2+ concentration for PCR with EvaGreenTM dye should be 2.5 mM.
4 Before pipetting, warm up the 20X solution to room temperature and thoroughly mix the solution by vortexing. EvaGreenTM is highly stable. However, dye adsorption onto container wall may occur during storage at low temperature over a long period of time.
Should it occur, vortexing the vial for a few seconds should alleviate the problem.
5 For best results, a hot-start enzyme should be used. However, buffer condition may need to
be adjusted accordingly to best take the advantage of the dye.
* EvaGreenTM and its uses are covered by pending US and international patents.
** SYBR is a registered trademark of Molecular Probes, Inc.
*** Practicing real-time PCR may require a license from Roche or Applied Biosystems, Inc.
Ames test performed by an independent lab, Litron Laboratories (Rochester, NY), showed that EvaGreen dye is nonmutagenic as well as noncytotoxic. EvaGreen dye appears to be completely cell membraneimpermeable (Figure 3), which may be a key factor responsible for the observed low toxicity. On the other hand, SYBR Green I is known to be a powerful mutation enhancer, possibly by inhibiting the natural DNA repairing mechanism in cells (Ohta, et el. Mutat. Res. 492, 91(2001)). The toxicity of SYBR Green I may be associated with its ability to enter cells rapidly (Figure 3). Since these toxicity tests were not performed on human, we still advise that researchers exercise precautions when handling the dye or any other DNA-binding molecules by wearing protective gears. For more information on the Ames test result, you may download a complete report at Biotium website.
EvaGreen solution may be disposed of using one of the following methods:
1) Add 25~50 mL bleach (regular household bleach) to each gallon (~4L) of the waste solution containing the dye and let the mixture react for at least 8 hours before pouring the solution to a sink;
2) Pour each 10 liters of EvaGreen waste solution through ~1g of activated charcoal. The filtrate may directly go to the drain while the charcoal may be treated as regular solid waste.
1. Mao, et al. Characterization of EvaGreen Dye and the implication of its physicochemical properties for qPCR applications. BMC Biotechnology 7, 76 (2007).
2. Novak, et al. An integrated fluorescence detection system for lab-on-a-chip applications. Lab Chip 7, 27(2007).
3. White, et al. Methylation-sensitive high-resolution melt-curve analysis of the SNRPN gene as a diagnostic screen for Prader-Willi and Angelman Syndromes. Clin. Chem. 53(11), 1 (2007).
4. Goldmeyer, et al. Development of a novel one-tube isothermal reverse transcription thermophilic helicase-dependent amplification platform for rapid RNA detection. J. Mol. Diag. 9(5), 639 (2007).
5. Wang, et al. DNA quantification using EvaGreen and a real-time PCR instrument. Anal. Biochem. 356, 303 (2006).
6. Ihrig, et al. Application of the DNA-specific dye EvaGreen for the routine quantification of DNA in microplates. Anal. Biochem. 359, 265 (2006).
7. Sang, et al. Genetic mutation analysis by CE with LIF detection using inverse-flow derivatization of DNA fragments. Electrophoresis 27, 3846 (2006).
8. Sang, et al. Capillary electrophoresis of double-stranded DNA fragments using a new fluorescence intercalating dye EvaGreen. J. Sep. Sci. 29, 1275 (2006).
9. Ohta, et el. Ethidium bromide and SYBR Green I enhance the genotoxicity of UV-irradiation and chemical mutagens in E. coli. Mutat. Res. 492, 91 (2001).
Stability Comparison of EvaGreenDye and SYBR Green I
Comparison of Cell Membrane Permeability between EvaGreen Dye and SYBR Green I
Contact us about this product :
Our team will respond you as soon as possible !
52062 Aachen Deutschland
Support Karolina Elandt
Fax: (+49) 241 56 00 47 88
Logistic :0241 40 08 90 86
IBAN lautet DE8839050000107569353
Handelsregister Aachen HR B 16058
Umsatzsteuer-Identifikationsnummer *** DE 815175831
firstname.lastname@example.org | Gentaur
Genprice Inc, Logistics
547, Yurok Circle
San Jose, CA 95123
Tel (408) 780-0908,
Fax (408) 780-0908,
Genprice Inc, Invoices and accounting
6017 Snell Ave, Ste 357
San Jose, CA 95123
Canada Montreal +15149077481
Ceská republika Praha +420246019719
Finland Helsset +358942419041
Magyarország Budapest +3619980547
US New York+17185132983
No related Items
Related Genes :
 Fluorescent cyanine dyes for the quantification of low amounts of dsDNA.
 A simplified method for identifying early CRISPR-induced indels in zebrafish embryos using High Resolution Melting analysis.
 Comparison of fluorescent intercalating dyes for quantitative loop-mediated isothermal amplification (qLAMP).
 High resolution melting analysis as a new approach to discriminate gluten-containing cereals.
 Rapid detection and grouping of porcine bocaviruses by an EvaGreen(®) based multiplex real-time PCR assay using melting curve analysis.
 A rapid screening method using DNA binding dyes to determine whether hair follicles have sufficient DNA for successful profiling.
 Screening Brucella spp. in bovine raw milk by real-time quantitative PCR and conventional methods in a pilot region of vaccination, Edirne, Turkey.
 Development of Novel High-Resolution Melting-Based Assays for Genotyping Two Alu Insertion Polymorphisms (FXIIIB and PV92).
 A Simultaneous Analytical Method for Duplex Identification of Porcine and Horse in the Meat Products by EvaGreen based Real-time PCR.
 Development of a high-throughput real time PCR based on a hot-start alternative for Pfu mediated by quantum dots.
Enter catalog number :