GENTAUR Belgium BVBA BE0473327336 Voortstraat 49, 1910 Kampenhout BELGIUM Tel 0032 16 58 90 45
GENTAUR U.S.A Genprice Inc,Logistics 547 Yurok Circle, SanJose, CA 95123
Tel (408) 780-0908, Fax (408) 780-0908, [email protected]

Index / Brady / _ Acetychloride 100X33RL-T3-P21 AC Signs;Pack-RL; /Product Detail : N006688 _ Acetychloride 100X33RL-T3-P21 AC Signs;Pack-RL;
Related keywords:

#N006688

_ Acetychloride 100X33RL-T3-P21 AC Signs;Pack-RL;

 Price: 401   EUR
455   USD
311   GBP

Product name : _ Acetychloride 100X33RL-T3-P21 AC Signs;Pack-RL;

Catalog number : N006688

Quantity: 220 Pcs Per Pack

Availability: Yes

Supplier name : Brady

Data sheet Data sheet : Ask more or other datasheet now !

More Details about

Description:

 

GENERAL

Brady B-7541 is a surface printed white polyester film with a permanent, acrylic based, pressure sensitive adhesive and overlaminated with a clear polyester film.

APPLICATIONS

B-7541 is used for pipemarkers and safety signs.

B-7541 gives excellent adhesion to low surface energy surfaces, such as polypropylene and ABS, as well as on most powder coatings.

Standard ink colors are black, red (RAL 3001-GL), yellow (RAL 1003-GL), blue (RAL5005-GL) and green (RAL 6032-GL).

 

ROHS Environmental Compliance
Brady B-7541 is RoHS compliant using EU Directive 2002/95/EC.



Details:




PHYSICAL PROPERTIES
TEST METHODS
AVERAGE RESULTS
Thickness ASTM D 1000
-Substrate
-Adhesive
-Total

0.075 mm (0.003 inch)
0.025 mm (0.001 inch)
0.100 mm (0.004 inch)

Adhesion to:
-Stainless Steel

-Polypropylene

-Textured ABS
ASTM D 1000
24 hours dwell

24 hours dwell

24 hours dwell
106 N/100 mm (96 oz/inch)

45 N/100 mm (41 oz/inch)

38 N/100 mm (35 oz/inch)
Tack ASTM D 2979
Polyken™ Probe Tack
(1 second dwell, 1 cm/sec separation)
578 g (20.4 oz)
Drop Shear PSTC-7
3 hours

Printed samples laminated to aluminium and allowed to dwell for 24 hours before exposure to the indicated environments.

PERFORMANCE PROPERTIES
TEST METHODS
TYPICAL RESULTS
High service temperature
Short term (1h) at 140°C (285°F)
No visible effect
Long term (30 days) at 110°C (230°F)
No visible effect
Low service temperature
30 days at -40°C (-40°F)
No visible effect
Minimum application temperature
-13°C (9°F)
Humidity Resistance
30 days humidity chamber
at 38°C (100°F) and 95% R.H.
No visible effect
Weatherability
ASTM G 53
30 days QUV
Yellow & red : very light darkening*
Green, blue & black : no visible effect
UV Resistance
30 days exposure to UV light
Yellow & red : very light darkening*
Green, blue & black : no visible effect

* In all cases the discoloration was less than the maximum allowed delta E for safety colors.

PERFORMANCE PROPERTIES
CHEMICAL RESISTANCE
Finished products are laminated to aluminium panels and allowed to dwell for 24 hours prior to testing. Test conducted at room temperature. Testing consisting of five cycles of 10 min immersions in the specified test fluid, followed by 30 min recovery periods. After final immersion, samples rubbed 10 times with cotton swab saturated with test fluid.

CHEMICAL REAGENT
SUBJECTIVE OBSERVATION OF VISUAL CHANGE
LABEL STOCK
SUBSTRATE / ADHESIVE
PRINTING AFTER IMMERSION
AND COTTON SWAB RUBS
Petroleumether 80/110 No visible effect No visible effect
Mineral oil No visible effect No visible effect
Toluene Slight adhesive oozing No visible effect
Alcohol Mixture* No visible effect No visible effect
Methyl ethyl ketone Slight adhesive oozing No visible effect
1,1,1-Trichloroethane Slight adhesive oozing No visible effect
5 % Sodium hydroxide No visible effect No visible effect
5 % Sodium chloride No visible effect No visible effect
5 % Sulfide acid No visible effect No visible effect
Skydrol® 500B-4 No visible effect No visible effect
2% soft soap No visible effect No visible effect
Water No visible effect No visible effect

* Alcohol mixture is a mixture of 50% ethanol, 30% methanol and 20% distilled water.
 

Product testing, customer feedback, and history of similar products, support a customer performance expectation of at least  two years from the date of receipt  for this product as long as this product is stored in its original packaging in an environment  below 80°F (27°C) and 60% RH. We are confident that our product will perform well beyond this time frame. However, it remains the responsibility of the user to assess the risk of using such product. We encourage customers to develop functional testing protocols that will qualify a product's fitness for use in their actual applications.

Contact us about this product :

Our team will respond you as soon as possible !

Email:
Name:
Phone:
Question, Comment :