GENTAUR Belgium BVBA BE0473327336 Voortstraat 49, 1910 Kampenhout BELGIUM Tel 0032 16 58 90 45
GENTAUR U.S.A Genprice Inc,Logistics 547 Yurok Circle, SanJose, CA 95123
Tel (408) 780-0908, Fax (408) 780-0908, [email protected]

Supplier : Lambda Laboratory Instruments

Country : | Number of Products : | View all products

About this Supplier: website

(800034)
(800033-03-f) "Fish_tail" soft stirring disc for 0.3l reactor
(800033-f) "Fish_tail" soft stirring disc for 0.4, 1, 3 and 7l reactor
(800033-fs) "Fish_tail" soft stirring disc for 0.4, 1, 3 and 7l reactor, modified geometry and material for softer stirring
(6923) Accessory for "fixed" rear side multiple fractions (up to more than 18 fractions)
(6920) Accessory for "moving" front side simultaneous fractions (incl. 3 pipe guides)
(800105) Adapter closed end and Luer_Lock
(800103) Adapter closed end and Luer_Lock (stainless steel)
(800106) Adapter hose end and Luer_Lock
(800104) Adapter hose end and Luer_Lock (stainless steel)
(4804) Adaptor for 230V output controllers
(800011-f) Additional pump line e.g. for feed (MULTIFLOW, reagent bottle with pipes, fittings, filter, tubing)
(800011-h) Additional pump line e.g. for harvest (PRECIFLOW, reagent bottle with pipes, fittings, filter, tubing)
(800011) Additional pump line for controlled addition of acid or base (pH_control)
(800013) Additional regulated gas flow (LAMBDA MASSFLOW 0_500ml_min) for pH control in cell cultures
(800012) Additional regulated gas flow (LAMBDA MASSFLOW 0_5l_min) for pH control in cell cultures
(800037-03) Adjustable lateral reactor holder 0.3 l reactor (2 pieces)
(800037-7) Adjustable lateral reactor holder 7 l reactor (2 pieces)
(800037-04) Adjustable reactor holder 0.4 l reactor
(800037-1) Adjustable reactor holder 1 l reactor
(800037-3) Adjustable reactor holder 3 l reactor
(800048) Adjustable support plate for pump
(800119-C) Aerosil 380 fume_like pure SiO2 for liquid O_ring (10 g)
(8090) AeroSilento air compressor and vacuum pump
(8090) AeroSilento pressure_regulated air compressor and vacuum pump
(800039) Air distributor (new self_cleaning microsparger)
(800041) Air distributor replacement disc (self cleaning microsparger)
(800030) Air input tubing holder (PEEK)
(800102-a) Alarm connector
(800501) ANTIFO Antifoam detection system (no special probes required)
(800019) Basic control unit (one unit is included in the start up kit)
(4813-b) BLDC motor (HIFLOW, VIT_FIT)
(4813-bm) BLDC motor (MAXIFLOW)
(4824) Cable for inverted analog ON_OFF control (8 poles)
(4824) Cable for inverted analog ON_OFF control (8 poles)
(6917) Coding magnetic band for X_axis (5 pces)
(6918) Coding magnetic band for Y_axis (5 pces)
(800054-1) Combined pH and temp. probe 12 cm with Variopin connector (Mettler Toledo)
(800054-2) Combined pH and temp. probe 15 cm with Variopin connector (Mettler Toledo)
(800054-3) Combined pH and temp. probe 22 cm with Variopin connector (Mettler Toledo)
(800060) Combined redox, pH and temp. probe 12 cm with Variopin connector (Mettler Toledo)
(6911) Communication module for pump switching and RS_232 connection
(6929) Communication module for pump switching, with RS_232, drop counting electronics, valve interface
(800088) Cooling loop
(4809) Cover
(800108) Device for sterile sampling (support, glass sampling device, syringe filter, 3 clamps and tubing)
(800090) DO probe fast response with reinforced PTFE membrane
(800097) DO probe solution
(800096) DO sensor cable
(5812) DOSER powder doser, programmable (glass vessel approx. 0.2 l)
(5812-L) DOSER powder doser, programmable (glass vessel approx. 1 l)
(800115) Double_seal conical insert for tubing
(800502) DOZITO Miniature syringe pump for 5 ml antifoam agent
(6926) Drop_counter (detector)
(800083) Electronic Peltier air output condenser (no water connection required)
(800087) Electronic Peltier cooling loop (no water connection required)
(4807) Excentric lever
(800N03-J) Fermentation vessel total volume 0.3l (jacketed); minimum working volume 35ml
(800N04-L) Fermentation vessel total volume 0.4l low (8 side arms)
(800N1) Fermentation vessel total volume 1l (8 side arms)
(800N3) Fermentation vessel total volume 3 l (8 side arms)
(800N7) Fermentation vessel total volume 7 l (8 side arms)
(800084-f) Fixing clamp for Peltier cooling element
(6904) Fixing mat
(800040) Fixing screw for air distributor
(800601) FNet fermenter control software for PC control of up to 6 fermentors, 12 integrators and 6 pumps
(800601) FNet fermenter control software for PC control of up to 6 fermentors, 12 integrators and 6 pumps
(4823) Foot switch for ON_OFF switching
(4823) Foot switch for ON_OFF switching
(6930) Gear bar extensions (2 pieces)
(4814-b) Gearbox (HIFLOW, VIT_FIT)
(4814-bm) Gearbox (MAXIFLOW)
(4814-s) Gearbox (PRECIFLOW, MULTIFLOW)
(800101) Glass condenser for air output
(800512) Glass syringe (5 ml)
(800102-g) Grounding cable
(800028) Head
(800084-p) Heat_conductive paste for Peltier cooling devices (10 g)
(6924) Hexagonal key set
(800112) Hexagonal key set (1.5, 2.5, 4mm)
(5001) HIFLOW peristaltic pump, 0_3'000 ml_hr, programmable
(5001) HIFLOW peristaltic pump, 0_3'000 ml_hr, programmable
(800014-e) High_performance motor and strirring head with cable and fittings
(6927) Inert valve (one way)
(800099-S) Input or output filter for air, 25 mm, 0.2µm pore size
(800099-L) Input or output filter for air, 50 mm, 0.2µm pore size
(800027) Large central screw cap for head fixing
(800025) Large silicone sterility membrane
(800025-e) Large silicone sterility membrane (new form)
(6907) Lateral supports for rod
(800078) Magnetic bottle holder for 125 ml bottle
(800079) Magnetic bottle holder for 250 ml bottle
(800510) Magnetic holder for DOZITO miniature syringe pump
(6922) Magnetic tubing guide
(800201) Mains cable
(800107) Male tubing adaptor for LAMBDA double_seal (PEEK)
(8072) MASSFLOW 500 (one gas station 0_500 ml_min regulation and mass flow measurement)
(8072-s) MASSFLOW 500 gas flow measurement (0_500 ml_min)
(8072) MASSFLOW 500 programmable gas flow controller (0_500 ml_min)
(8071) MASSFLOW 5000 (one gas station 0_5 l_min regulation and mass flow measurement)
(8071-s) MASSFLOW 5000 gas flow measurement (0_5 l_min)
(8071) MASSFLOW 5000 programmable gas flow controller (0_5 l_min)
(6001) MAXIFLOW peristaltic pump, 0_10'000 ml_hr, programmable
(6001) MAXIFLOW peristaltic pump, 0_10'000 ml_hr, programmable
(800091) Membrane module for DO probe
(800010-03) Minifor advanced kit 0.3l jacketed vessel min. vol. 35ml contains all for common fermentations
(800010-04) Minifor advanced kit 0.4l contains all what is necessary for common fermentations
(800010-1) Minifor advanced kit 1l contains all what is necessary for a common fermentations
(800010-3) Minifor advanced kit 3l contains all what is necessary for a common fermentations
(800010-7) Minifor advanced kit 7l contains all what is necessary for a common fermentations
(800010-04) MINIFOR laboratory fermentor_bioreactor advanced kit 0.4 l vessel
(800010-1) MINIFOR laboratory fermentor_bioreactor advanced kit 1 l vessel
(800010-3) MINIFOR laboratory fermentor_bioreactor advanced kit 3 l vessel
(800010-7) MINIFOR laboratory fermentor_bioreactor advanced kit 7 l vessel
(800010-03) MINIFOR laboratory fermentor_bioreactor advanced kit, 0.3 l jacketed vessel, min. vol 35 ml
(800010-04R) MINIFOR laboratory fermentor_bioreactor start_up kit 0.4 l vessel
(800010-1R) MINIFOR laboratory fermentor_bioreactor start_up kit 1 l vessel
(800010-3R) MINIFOR laboratory fermentor_bioreactor start_up kit 3 l vessel
(800010-7R) MINIFOR laboratory fermentor_bioreactor start_up kit 7 l vessel
(800010-03R) MINIFOR laboratory fermentor_bioreactor start_up kit, 0.3 l jacketed vessel, min. vol 35 ml
(800010-03R) Minifor start_up kit 0.3l jacketed vessel min. vol. 35ml (without pumps and pO2_electrode)
(800010-04R) Minifor start_up kit 0.4l (without pumps and pO2_electrode)
(800010-1R) Minifor start_up kit 1l (without pumps and pO2_electrode)
(800010-3R) Minifor start_up kit 3l (without pumps and pO2_electrode)
(800010-7R) Minifor start_up kit 7l (without pumps and pO2_electrode)
(800052) Mobile cock PEEK
(800052-e) Mobile cock PEEK for magnetic coupling
(800604) Modern quality brand laptop with Windows operating system
(800604) Modern quality brand laptop with Windows operating system
(4901) MULTIFLOW peristaltic pump, 0_600 ml_hr, programmable
(4901) MULTIFLOW peristaltic pump, 0_600 ml_hr, programmable
(6901) OMNICOLL fraction collector_sampler, programmable
(6901) OMNICOLL fraction collector_sampler, programmable
(800056) Open screw cap large SVL 30
(800055) Open screw cap small SVL 22
(800086) Out_gas condenser cylinder for Peltier out_gas condenser with tubing connection
(800089) Over_pressure (1 atm) security valve PEEK
(6925) O_ring for tubing fixing (5 pces)
(800095) Parameter X cable
(800602) PC control cable with RS 485 to RS 232 converter and key
(800602) PC control cable with RS 485 to RS 232 converter and key
(800084-c) Peltier cooling element with control electronics and fan
(8091) Peltier cooling trap for AeroSilento air compressor
(8091) Peltier cooling trap for AeroSilento air compressor
(800085) Peltier out_gas condensing finger
(6921) Pipe guide for simultaneous fractions 1 pce
(4821) Plug_in power supply (12V_24W) for HIFLOW, MAXIFLOW, VIT_FIT, MASSFLOW
(4820) Plug_in power supply (12V_6W) for PRECIFLOW, MULTIFLOW, DOSER
(6903) Plug_in power supply (9V)
(6600) PNet control software for LAMBDA peristaltic and syringe pumps, DOSER and MASSFLOW
(6600) PNet control software for LAMBDA peristaltic and syringe pumps, DOSER and MASSFLOW
(4818) Power supply for RS_232_485 converter (5 V _ 1 W)
(4818) Power supply for RS_232_485 converter (5V_1W)
(4801) PRECIFLOW peristaltic pump, 0_600 ml_hr
(4801) PRECIFLOW peristaltic pump, 0_600 ml_hr
(8091-b) Pressure_resistant glass bottle for Peltier cooling trap
(8091-p) Protection shield for glass bottle for Peltier cooling trap
(800517) PTFE tubing 1.8mm x 1m
(6916) PTFE tubing ext. diam. 1.8 mm (5 m)
(4811) Pump head
(4802) Pump ON_OFF remote control cable (2 poles)
(4802) Pump ON_OFF remote control cable (2 poles)
(4810) Pump remote control (analog and digital) cable (8 poles)
(4810) Pump remote control (analog and digital) cable (8 poles)
(6914) Pump remote control cable analog (2 poles, open ends)
(4803) PUMP_FLOW INTEGRATOR (for LAMBDA pumps, DOSER and MASSFLOW)
(4803) PUMP_FLOW INTEGRATOR (for LAMBDA pumps, DOSER and MASSFLOW)
(800202) Quadruple plug box (Power and RS_connection for up to 4 LAMBDA laboratory instruments)
(800051) Quadruple sampling port with fittings
(800098-1000) Reagent bottle 1 L with pipes and Luer_Lock fitting
(800098-125) Reagent bottle 125 ml with pipes and Luer_Lock fitting
(800098-2000) Reagent bottle 2 L with pipes and Luer_Lock fitting
(800098-250) Reagent bottle 250 ml with pipes and Luer_Lock fitting
(800098-5000) Reagent bottle 5 L with pipes and Luer_Lock fitting
(800061) Redox controller
(6910) Remote control cable for fraction collector (analog)
(4810-s) Remote control cable for LAMBDA pumps (5 poles)
(4805) Roller
(4808) Rotor
(4819-E) RS line cable with extension plug for an additional instrument
(4819-E) RS line cable with extension plug for connection of an additional instrument
(4819-F) RS_232 conection cable for fermenter
(4819) RS_232 connection cable
(6910-rs) RS_232 connection cable
(4819-232) RS_232 connection cable
(4819-ES) RS_232 extension cable (Converter _ PC)
(4822) RS_232 interface
(4822) RS_232 interface
(4819-ES) RS_232 serial line extension cable (Converter _ PC)
(4819-ES) RS_232 serial line extension cable (Converter _ PC)
(4817) RS_232_485 converter
(4817) RS_232_485 converter
(4819) RS_485 connection cable
(4817-kit) RS_485 connection kit
(4817-kit) RS_485 connection kit
(4816) RS_485 interface
(4816) RS_485 interface
(4819-E) RS_485 line cable with extension plug for connection of an additional instrument
(800118) Sealing disc for septum protection cap (10x)
(4819-0.1/0.3) Sensitivity damping cable by 3 times or 10 times
(800114-B) Septum adapter body
(800114) Septum adapter for sampling port
(800117) Septum protection cap
(6912) Set for keeping two lower parts together
(800603) SIAM industrial fermentation software
(800603) SIAM industrial fermentation software
(800021) Silicone open stopper (opening diam. 12 mm)
(800022) Silicone open stopper (opening diam. 12.8 mm), green, for DO probe
(800114-O) Silicone o_ring for septum adapter body
(800020-L) Silicone stopper for large unused ports
(800020-S) Silicone stopper for small unused ports
(4815-1) Silicone tubing 0.5_2.5mm x 10m
(4815-2) Silicone tubing 1_3mm x 10m
(4815-3) Silicone tubing 2_4mm x 10m
(800100-35) Silicone tubing 3_5 mm, 10m
(4815-4) Silicone tubing 3_5mm x 10m
(800100-36) Silicone tubing 3_6 mm, 5m
(4815-5) Silicone tubing 4_6mm x 10m
(800100-48) Silicone tubing 4_8 mm, 5m
(800100-610) Silicone tubing 6_10 mm, 5m
(800119-A) Solution A for liquid O_ring (40 ml)
(800119-B) Solution B for liquid O_ring (40 ml)
(800110) Spare needle diam. 3mm x 150mm
(800109) Spare needle diam. 3mm x 250mm
(800111) Spare needle diam. 3mm x 50mm
(800031-03) Sparger pipe for 0.3l vessel
(800031-04) Sparger pipe for 0.4l vessel
(800031-1) Sparger pipe for 1l vessel
(800031-3) Sparger pipe for 3l vessel
(800031-7) Sparger pipe for 7l vessel
(4806) Stainless steel spring
(800113) Stainless steel tubing clamp
(800113) Stainless steel tubing clamp
(800023-L) Stainless steel washer large
(800023-S) Stainless steel washer small
(4813-s) Stepping motor (PRECIFLOW, MULTIFLOW)
(800108-g) Sterile sampling device (glass)
(800033-03) Stirring disc for 0.3l reactor
(800033) Stirring discs for 0.4, 1, 3 and 7l reactors
(6909) Stop magnet
(800515) Stroke adjusting key
(800120) Substrate holding basket (stainless steel)
(6902) Support (lower part of collector)
(6919) Support for coding magnetic band for X_axis
(800108-s) Support for sterile sampling device
(6905) Support plate for pump
(800047) Support rod
(6906-L) Supporting rod for columns diam. 12 mm 100cm
(6906-S) Supporting rod for columns diam. 12 mm 60cm
(7010) Syringe fixing strap
(800514) Syringe plunger blocker for autoclavation
(800511) Syringe plunger pushing bar
(800513) Syringe suspending string
(800516) Syringe_tubing fitting assembly (PEEK)
(7700) TECHNICS I medical syringe pump
(6908) Tube guide
(6913-3) Tube rack for 4x10 tubes of diam. 20 mm
(6913-5) Tube rack for 3x8 tubes of diam. 30 mm
(6913-4) Tube rack for 4x10 tubes of diam. 25 mm
(6913-2) Tube rack for 5x12 tubes of diam. 16 mm
(6913-1) Tube rack for 6x15 tubes of diam. 12 mm
(800116) Tubular septum (12x)
(800049) Vessel supporting stand for 1l, 3l and 7l reactors
(800014) Vibromixer with cable and fittings
(4815-5v) Viton tubing 4_6mm x 5m
(7002) VIT_FIT HP high_pressure syringe pump, programmable
(7002) VIT_FIT HP high_pressure syringe pump, programmable
(7001) VIT_FIT syringe pump, programmable
(7001) VIT_FIT syringe pump, programmable
(800800) Weighing module to keep the culture weight constant (connected to channel "X" of the MINIFOR)
(6928) White pen for fraction position marking

Kits Elisa; taq POLYMERASE

Search in Google:

google

Share this page:
share on twitter rss feedsfacebookgoogle gentaur



Quick order!
Enter catalog number :


Gentaur; yes we can